FA 500 Dew point sensor Cs Instruments, Dew point FA 500 Cs Instruments Viet Nam, Cs Instruments Đại Lý Việt Nam.

Cs Instruments Vietnam​. Nhà cung cấp Anh Nghi Sơn - ANS Viet Nam.

Cung cấp tất cả máy móc, thiết bị của Cs Instruments.

FA 500 - Dew point sensor from -80 to 20 °Ctd

FA 500 is the ideal dew point measuring instrument with integrated display and alarm relay for refrigeration, membrane and desiccant driers.

Special features:

• Integrated display

• Threshold value adjustable via keypad alarm relay (max. 60 VDC, 0.5 A)

• Pressure-tight up to 350 bar (special version) • Extreme long-term stability

• Quick response time

• 4...20 mA analog output

• 2 versions: Refrigeration dryers and desiccant dryers

• NEW: Modbus-RTU interface

• NEW: Higher resolution of sensor signal caused by the improved evaluation electronics

• NEW: Sensor diagnosis on site with a portable device or CS Service Software

Readable via Modbus: - Pressure dew point [° Ctd.] - Temperature [° C] - Rel. humidity [% rh] - Abs. humidity [g / m³] - Moisture content [g / m³] - Moisture content V / V [ppmV / V] - Water vapor particle pressure [hPa] - Atmospheric dew point [° Ctd.atm]

TECHNICAL DATA FA 500

Measuring range: -80...20 °Ctd, -60...30 °Ctd, -20...50 °Ctd, resp.. 0...100% RH

Accuracy: ± 1°C to +50...-20°Ctd ± 2°C to -20...-50°Ctd ± 3°C to -50...-80°Ctd

Pressure range: -1...50 bar special version up to 500 bar

Power supply: 24 VDC (18...30 VDC)

Protection class: IP 65

EMC: According to DIN EN 61326-1

Operation temp.: -20...50 °C

Connection: 2 x M12, 5-pole for anlalog output, Modbus-RTU and alarm output, M-Bus (optional) Ethernet (PoE) (optional)

PC connection Modbus-RTU interface (RS 485)

Output: (3-wire) 4...20 mA = -80...20°Ctd 4...20 mA = -60...30°Ctd 4...20 mA = -20...50°Ctd

Burden for analog output: < 500 Ω

Alarm relay: NC, max.60 VDC, 0,5 A

Screw-in thread: G 1/2“

Dimensions of housing: 76,5 x 85 x 75 (BxHxT)

Order code:

0699 0501 FA 500 dew point sensor for refrigeration driers, -20...50 °Ctd

0699 0502 FA 500 dew point sensor for desiccant driers, -80...20 °Ctd

0699 0503 FA 500 dew point sensor for desiccant driers, -60...30 °Ctd

Connection cables:

0553 0104 Connection cable for VA/FA series, 5 m

0553 0105 Connection cable for VA/FA series, 10 m

0553 0106 Cable for alarm/pulse output, with M12 plug, length 5 m

0553 0107 Cable for alarm/pulse output, with M12 plug, length 10 m

0553 2503 Ethernet connection cable length 5 m, M12 plug x-coded (8 pin) to RJ 45 plug

0553 2504 Ethernet connection cable length 10 m, M12 plug x coded (8 pin) to RJ 45 plug

Options for FA 500:

Z699 0515 Option: max. pressure FA5xx 350 bar

Z699 0516 Option: max. pressure FA5xx 500 bar

Z699 0514 Option: special scaling FA5xx 4…20 mA=__ … __ g/m³, ppm etc

Z699 0511 Option: connection thread FA5xx, 5/8“ UNF

Z699 0512 Option: connection thread FA5xx, 1/2“ NPT

Z699 0517 Option: surface condition FA5xx, free of oil & grease

Z695 5006 Ethernet-Interface for VA500/520 and FA 500

Z695 5007 Ethernet-Interface PoE for VA500/520 and FA500

Z695 5004 M-Bus board for VA500/520 and FA500

0699 3390

0699 3590

0554 2007

0554 0110

0554 0109

0699 3396

Liên hệ: Nguyễn Chí Hải

Sdt: 0398991575

Gmail: hai@ansgroup.asia