VA 520 - Flowmeter Cs Instrument VietNam, Flowmeter VA 520 Cs Instrument, Cs Instrument Đại Lý Việt Nam.

Cs Instruments Vietnam​. Nhà cung cấp Anh Nghi Sơn - ANS Viet Nam.

Cung cấp tất cả máy móc, thiết bị của Cs Instruments Vietnam​.

VA 520 - Mass Flow Meter for Compressed Air and Gas.

Our affordable mass flow meter for compressed air and gases works according to the approved calorimetric measuring principle. An additonal pressure and temperature compenstation is not necessary. Contrary to the previously used bridge circuit the newly developed evaluation electronics records all measured values digitally. This enables very precise and fast measurements.

Due to the new evaluation electronics, all VA 520 models have an integrated Modbus output as a standard. So all parameters can be easily transferred via Modbus. 

Due to its compact design it is possible to monitor all compressed air systems from the compressor to the smallest compressed air tool (1/4“ to 2 inch) with the new mass flow sensor VA 520. VA 500 flow sensors are available for larger pipe diameters from DN 50 to DN 300. Apart from compressed air also other gases like e.g. nitrogen, oxygen and CO2 can be measured.

TECHNICAL DATA VA 520 

Parameters: m³/h, l/min (1000 mbar, 20 °C) at compressed air or Nm³/h, Nl/min (1013 mbar, 0 °C) for gases

Units adjustable via keys at display: m³/h, m³/min, l/min, l/s, ft/ min, cfm, m/s, kg/h, kg/min, g/s, lb/min, lb/h

Sensor: Thermal mass flow sensor

Measuring medium: Air, gases

Gas types are adjustable over CS service software or CS data logger: Air, nitrogen, argon, helium, CO2, oxygen, vacuum

Measure range: See table above

Accuracy: (m.v.: of meas. value) (f.s.: of full scale) ± 1.5 % of m.v. ± 0.3 % of f.s. on request ± 1.0 % of m.v. ± 0.3 % of f.s. 

Operating temperature: -30...80 °C

Operating pressure: -1 to 16 bar optional to PN 40

Digital output: RS 485 interface (Modbus-RTU), optional: Ethernet-Interface PoE), M-Bus

Analog output: 4...20 mA for m³/h e. g. l/min

Pulse output: 1 Pulse per m³ or per liter galvanically isolated. Pulse value can be set on the display. Alternatively, the pulse output can be used as an alarm relay

Supply: 18...36 VDC, 5 W

Burden: < 500 Ω

Housing: Polycarbonate (IP 65)

Measuring section: stainless steel, 1.4301 or 1.4571

Process connection: Flange (to DIN EN 1092-1 e. g. ANSI 150 Ibs or ANSI 300 Ibs) 

Mounting position: Any

Dimension:

Liên hệ: Nguyễn Chí Hải

Sdt: 0398991575

Gmail: hai@ansgroup.asia