FA 515 Dew point sensor Cs Instruments, Dew point sensor FA 515 Cs Instruments Viet Nam, Cs Instruments Đại Lý Việt Nam.

Cs Instruments Vietnam​. Nhà cung cấp Anh Nghi Sơn - ANS Viet Nam.

Cung cấp tất cả máy móc, thiết bị của Cs Instruments.

Dew point sensor FA 515 Ex

Dew point sensor FA 515 Ex for residual moisture measurement in explosive areas

Typical applications: Air / Compressed air, Argon, Nitrogen, Biogas, Natural gas, Hydrogen, etc.

Dew point sensor FA 515 Ex complies with the following industry approvals:

  • ATEX II 2G Ex ib IIC T4 Gb Zone 1, gas, intrinsically safe, Temp. 135°C
  • ATEX II 2D Ex ib IIIC T80°C Db Zone 21, dust, intrinsically safe, Temp. 80°C

Please note: The FA 515 Ex may only be used in connection with approved Ex-rated power supplies or safety barriers or galvanic separating elements. Thereby the following maximum values must be observed:

  • U2 = 28 V max.
  • I2 = 93 mA max.
  • P2 = 0,65 W max.

Special features of the dew point sensor FA 515 Ex

  • Robust design
  • Pressure resistant up to 500 bar
  • Long-term stable humidity sensor, approved for years
  • 4...20 mA analogue output in 2-wire system
  • Further parameters adjustable via software: % RH, g/m³, mg/m³, ppm, V/V, g/kg
  • NEW: Higher resolution of the sensor signal due to improved evaluation electronics



Measuring range: -80...20 °Ctd = 4...20 mA

Pressure range: -1...500 bar

Power supply:: 24 VDC (10...30 VDC)

Accuracy: ± 1 °C to -20...+20 °Ctd ± 2 °C to -50...-20 °Ctd ± 3 °C to -80...-50 °Ctd 

Output: 4...20 mA in 2-wire technology

Protection class: IP 65

EMV: according to DIN EN 61326-1

Operating temp.: -20...+70 °C

Storage temp.:: -40...+80 °C

Burden for analogue output: < 500 Ω to 24 V 

Screw-in thread: G 1/2“ stainless steel, optional 5/8” UNF

Connection: M12 4-pin

Sensor protection: Sintered filter 50 µm stainless steel

Order code

0699 5515

0699 3590

0699 3290

Z699 0514

0554 3071

Liên hệ: Nguyễn Chí Hải

Sdt: 0398991575

Gmail: hai@ansgroup.asia